Introduction: "C" mark for quantitative packaging products

1. The meaning of "C" mark:

The so-called "C" (China's first letter) logo management is actually a new type of supervision and management of the quantitative packaging commodity measurement status. This management method puts forward higher requirements for enterprises that produce quantitatively packaged commodities. An enterprise that voluntarily adopts this management method only when its measurement assurance capability meets the requirements of the Evaluation Specification for Quantitative Packaging Commodity Manufacturing Enterprises' Measurement Guarantee Ability Only when required will the manufacturing enterprise be allowed to use the "C" mark on the packaging of the quantitatively packed goods it produces.

2. Significance of developing "C" logo management:

With the development of the market economy and the continuous improvement of people's living standards, the production and sales of quantitatively packaged goods have increased day by day, and it has become the main form of commodities in China's market. The phenomenon of interest has happened from time to time, and it has become the focus of attention of the government, society and consumers. At present, there are many kinds of quantitative packaging commodities in China, and the measurement assurance capabilities of production enterprises are uneven. The phenomenon that the net content of quantitatively packaged goods is short and short is also frequent, and the people have reacted strongly. Although in recent years, the General Administration of Quality Supervision, Inspection and Quarantine strengthened the supervision and management of quantitatively packaged commodities by formulating and improving departmental regulations, the situation is still not optimistic. In order to strengthen the supervision and management of quantitative packaging commodities from the source, AQSIQ formulated the "Quantitative Packaging Commodity Production Enterprise Measurement Guarantee Evaluation Regulations" and "Quantitative Packaging Commodity Production Enterprise Measurement" on the basis of extensive research. "Guarantee Capability Evaluation Standards" decided to carry out quantitative assurance assurance capacity evaluation work on the basis of quantitative packaging commodity production enterprises, and on this basis, gradually establish and implement quantitative packaging commodity "C" mark management system, in order to comprehensively improve China The measurement management level of quantitative packaging commodity production enterprises. The implementation of "C" mark management for quantitatively packaged goods is a new way of supervision and management in China. In a sense, it is a "three-dimensional" three-dimensional supervision. The first is the self-supervision of the enterprise, because the first link is the first self-evaluation of the enterprise; the second is the supervision of the government quality and technical supervision department, that is, the government department organizes the necessary verification based on the self-evaluation of the enterprise; and finally comes from the market and consumption Supervision. The implementation of "C" mark management will have an important impact on improving the overall level of quantitative management of China's quantitative packaging production enterprises, protecting the interests of consumers and producers, promoting the integration of China's measurement work with internationally accepted practices, and adapting to the new situation of China's accession to the WTO. . For quantitatively packaged goods printed with the "C" logo, consumers can buy with confidence without worrying about "shortage of shortfalls".

3. The scope of "C" logo development:

Due to the large variety of quantitative packaging commodities, AQSIQ decided to publish a catalogue of commodities that can use the "C" mark in batches on the basis of gradual summary and implementation. There are three types and 13 varieties in the first batch of commodities currently announced. They are foods: wine, edible oil, instant noodles, rice, flour, milk powder, milk, yogurt, carbonated drinks, purified water; washing products: washing powder; Cosmetics: shampoo, skin cream.

4. The role of "C" mark:

First, it shows that the enterprise that produced the commodity has met the requirements of the National Standard for Evaluation of Measurement Guarantee Ability of Quantitative Packaging Commodity Production Enterprises; the second is that the net content of the commodity complies with the provisions of the "Regulations on Quantitative Packaging Commodity Measurement Supervision"; The quality and technical supervision departments at all levels should avoid repeated random inspections of quantitatively packaged products that have obtained certification marks and qualified certification enterprises when formulating supervision and random inspection plans.

5. How to apply for the "C" mark:

One is that the enterprise conducts self-assessment in accordance with the Standards for Measuring and Assuring Capability of Quantitative Packaging Commodity Production Enterprises. Enterprises that meet the requirements will apply to the local provincial quality and technical supervision department for measurement assurance capability evaluation by self-declaration; The supervision department organizes and implements the necessary verification based on the self-evaluation of the enterprise. After verification, the provincial quality and technical supervision department that issues the application will issue the nationwide "Qualified Certificate of Competence for Measurement Guarantee Capability of Quantitative Packaging Commodity Production Enterprises" and allow the enterprise Use the nationwide unified measurement assurance capability qualification mark "C" on the quantitative packaging products it produces; the third is market supervision. After market supervision and inspection or consumers report enterprises and commodities that do not meet the requirements of these regulations, the State Administration will order the provincial quality and technical supervision department that issues certificates and conformity marks to correct them.

Documents that should be submitted by the applying enterprise:

(1) "Evaluation Report of Measurement Guarantee Ability of Quantitative Packaging Commodity Production Enterprises";
(2) Enterprise measurement management documents;
(3) The table of the enterprise's measurement equipments;
(4) Registration form for compulsory verification of measuring instruments by enterprises;
(5) Product standards for enterprises to produce quantitatively packaged commodities;
(6) Packaging marks and instructions for the quantitative packaging commodities produced by the enterprise.

6. Supervision and review after issuance:

Provincial quality and technical supervision departments that issue certificates and conformity marks shall be rectified by the State Administration of the People ’s Republic of China for non-compliance with the requirements of the “Regulations”; enterprises that have obtained certificates that do not meet the requirements of the “Code” shall be ordered to make rectification. If it meets the requirements, the certificate shall be cancelled, and the use of the measurement assurance capability qualification mark shall be stopped. The certificate is valid for three years, and must be re-examined three months before the expiration. Re-examine the qualified new certificate and continue to use the qualified mark, otherwise cancel the certificate, stop using the qualified mark, and publish it to the public.

Seven, "C" logo use regulations and drawings

(1) The outer edge of the graphics of the qualified mark for measurement assurance capability is a regular octagon, and the inner edge is a square.
(2) The "C" mark shall be marked at the same time as the net content, before or after the net content. The character height of the "C" sign is the same as the character height of the net content, and the minimum height is not less than 4mm.
(3) The logo is recommended to be black, and other colors can also be selected according to printing needs.
(4) No unit or individual may use the "C" mark without authorization. Once investigated and dealt with, it will be dealt with seriously in accordance with relevant regulations.

Tow Rope 

Suitable for Car, Bus, Cargo truck, Trailer, Special vehicle (military, retardant)

When break down, out of fuel, or drop into the mud, car towing rope will be one efficient solution.

 

Description of Tow Rope

Ultra-high Molecular Weight Polyethylene (UHMWPE) fiber rope is being instead of traditional steel wire rope, its strength is 1.5 times higher than the same diameter of wire rope, light weight 85% only. Except UHMWPE material, it also use polyester, PP monofilament and PP danline as raw material.

 

Sturcture

Material

Color

Diameter

Length

Breaking Strength

Braided

UHMWPE

Orange

8 mm

5m

59.37 KN / 6.06 T

Braided

UHMWPE

Blue

10 mm

5m

80 KN / 8.16 T

Twisted

Polyester

White

16 mm

5m

27.44 KN / 2.80 T

Braided

PP Mono

Yellow

18 mm

5m

20 KN / 2.04 T

Twisted

PP Danline

Yellow 

18 mm

5m

25 KN / 2.55 T

Woven Tape

Polyester

Orange

50 mm Width

5m

30 KN / 3.06 T

 

tow rope

car towing rope

car tow rope

Tow Rope

Tow Rope,Car Tow Rope,Elastic Tow Rope,Tugboat Rope

ROPENET GROUP CO.,LTD , https://www.cnparacord.com

Posted on